Global plastic waste set to almost triple by 2060, says OECD

New report calls for radical action to curb plastic waste.

The amount of plastic waste produced globally is on track to almost triple by 2060, with around half ending up in landfill and less than a fifth recycled, according to a new OECD report.

Global Plastics Outlook: Policy Scenarios to 2060 says that without radical action to curb demand, increase product lifespans and improve waste management and recyclability, plastic pollution will rise in tandem with an almost threefold increase in plastics use driven by rising populations and incomes.

The report estimates that almost two-thirds of plastic waste in 2060 will be from short-lived items such as packaging, low-cost products, and textiles.

“If we want a world that is free of plastic pollution, in line with the ambitions of the United Nations Environment Assembly, we will need to take much more stringent and globally co-ordinated action,” OECD Secretary-General Mathias Cormann said.

“This report proposes concrete policies that can be implemented along the lifecycle of plastics that could significantly curb – and even eliminate – plastic leakage into the environment.”

The report (available as a preliminary version ahead of its full publication later this year) projects global plastics consumption rising from 460 million tonnes (Mt) in 2019 to 1,231 Mt in 2060 in the absence of bold new policies, a faster rise than most raw materials.

Growth will be fastest in developing and emerging countries in Africa and Asia, although OECD countries will still produce much more plastic waste per person (238 kg per year on average) in 2060 than non-OECD countries (77 kg).

Globally, plastic leakage to the environment is seen doubling to 44 Mt a year, while the build-up of plastics in lakes, rivers and oceans will more than triple, as plastic waste balloons from 353 Mt in 2019 to 1,014 Mt in 2060.

Most pollution comes from larger debris known as macroplastics, but leakage of microplastics (synthetic polymers less than 5 mm in diameter) from items like industrial plastic pellets, textiles, and tyre wear is also a serious concern.

The projected rise in plastics consumption and waste will come despite an expected increase in the use of recycled plastic in manufacturing new goods as well as technological advances and sectoral economic shifts that should mean an estimated 16 per cent decrease by 2060 in the amount of plastic required to create USD 1 of economic output.

The share of plastic waste that is successfully recycled is projected to rise to 17 per cent in 2060 from 9 per cent in 2019, while incineration and landfilling will continue to account for around 20 per cent and 50 per cent of plastic waste respectively.

The share of plastic that evades waste management systems – ending up instead in uncontrolled dumpsites, burned in open pits or leaking into the soil or aquatic environments – is projected to fall to 15 per cent from 22 per cent.

The new report builds on the OECD’s first Global Plastics Outlook: Economic Drivers, Environmental Impacts and Policy Options, released in February 2022.

That first report found that plastic waste has doubled in two decades, with most ending up in landfill, incinerated or leaking into the environment.

Since that report release, UN member states have pledged to negotiate a legally binding international agreement by 2024 to end plastic pollution.

Global Plastics Outlook: Policy Scenarios to 2060 looks at the impact of two potential scenarios.

The first, a regional action scenario comprising a mix of fiscal and regulatory policies primarily in OECD countries could decrease plastic waste by almost a fifth and more than halve plastic leakage into the environment without a substantial impact on global GDP, which would be lower by 0.3 per cent by 2060.

The second, a global action scenario comprising more stringent policies implemented worldwide, could decrease plastic waste by a third and almost completely eliminate plastic leakage to the environment while lowering global GDP by an estimated 0.8 per cent.

The report also looks at how actions to reduce greenhouse emissions could reduce plastic pollution given the interplay between the plastics lifecycle, fossil fuels and climate change.

Policies to reduce the environmental impacts of plastics and encourage a more circular use of them should include:

  • Taxes on plastics, including on plastic packaging
  • Incentives to reuse and repair plastic items
  • Targets for recycled content in new plastic products
  • Extended producer responsibility (EPR) schemes
  • Improved waste management infrastructure
  • Increased litter collection rates

Comment below to have your say on this story.

If you have a news story or tip-off, get in touch atinfo@incleanmag.com.au

Sign up to INCLEAN’s newsletter.

Leave a comment:

Your email address will not be published. All fields are required